Ace Spinner ACE-30 1.2

Solvent Pump 6py53
PUMP,DIAPHRAGM,3/4″

Manufacturer: Dayton

Year: 2019

Serial No.: PF01187 

Original Purchase Price: $2,100
Asking Price: $1,470

Solvent Pump 6py53
PUMP,DIAPHRAGM,3/4″

Manufacturer: Dayton

Year: 2019

Serial No.: MF634259

Original Purchase Price: $2,100
Asking Price: $1,470

Solvent Pump 6py53
PUMP,DIAPHRAGM,3/4″

Manufacturer: Dayton

Year: 2019

Serial No.: not readable 

Original Purchase Price: $2,100
Asking Price: $1,470

Agilent IDP7 5.4 cfm Oil-Free, Scroll Pump with Deep Vacuum

12.5 Gallon 316 Stainless Steel Dished Bottom Tank

12.5 Gallon 316 Stainless Steel Dished Bottom Tank, Dished Top, #4 Inside / 2B
Outside Finish, 316 Stainless Steel Externals, Dimple Jacket
Material Finish
Internal Surface Finish: #4 Sanitary Finish w/ Surface Ground Smooth, Polished &
Buffed
External Surface Finish: 2B Finish w/ Sharp Edges & Weld Discoloration Removed
(weld bead is still visible)
Passivate: None
Top
Top Head: Manway Top, Removable, Rated for 50PSI and FV with White Hypalon
Gasket, 316 Stainless Steel
Mixer Mount: No Bridge or Clamp Bracket; See Fittings Section Below for Flange,
Triclamp or NPT Mounts, As Applicable
Shell
Shell Dims: 16″ Outside Diameter x 16″ Straight Side Height, 316 Stainless Steel,
10 Gage
Shell Volume: 14 Gallons
Baffles: None
Bottom
Bottom Head: Dished, 316 Stainless Steel, 10 Gage
Heating and Cooling
Dimple Jacket for Shell & Dish Bottom Head, 2″ Dimple Spacing, 304 Stainless
Steel, 12″ Jacket Height (as applicable), 1″ NPT Nipple Inlet/Outlet(s), Designed for
50PSI @ 250°F, Surface Area = 838.0in^2, (2) Zone
Internal Pressure Design: 30 PSI at 250°F
ASME Code Stamp: Yes
Insulation: None, See Adder Below

Fittings
2″ Triclamp Mixer Mount in Top Head for Mixer Mount
1″ Triclamp Ferrule in Top Head for Dip Tube
2″ Triclamp Sight Glass, Includes Ferrule, Clamp & Gasket in Top Head for Sight
Glass
2″ Triclamp Sight Glass, Includes Ferrule, Clamp & Gasket in Top Head for Sight
Glass
1/2″ Triclamp Ferrule in Top Head for Condenser
2″ Triclamp Ferrule in Bottom Head for Drain
Supports
Legs: (3) 1-1/2″ Pipe Legs, 316 Stainless Steel
Feet: Bolt Down Flanges
Casters: None
Clearance to the Floor: 12″
Fork Pockets: None
Lifting Lugs: (2) Lifting Lugs
1 HP XP Triclamp Mount Mixer
①Motor: 1 HP, XPFC, Inverter Rated, Class 1, Div 1 Group D, 208-230/460V, 3Ph, 1750
RPM, Bare Wire Leads, 2.3A @ 460V
②Gearbox: None
③Control: None
④Mount: 2” Sanitary Mount, 316SS Wetted/Aluminum & Painted Steel Externals,
Carbon Steel Hardware
⑤Bearing: SS Bearing; Carbon Steel Coupler
⑥Seal: High Performance PTFE Blend Quad Lip Seal Nitrile Anti-Rotation O-Ring,
Sealed for Pressure @ 30psi / Full Vacuum, 250F
⑦Wetted Surface Finish: #4 Food Grade
⑧Shaft: 0.625” x 25” Exposed Length, 17-4 H900 SS, Impeller Welded to Shaft,
Polished to #4 Food Grade Finish
⑨Bottom Impeller: 3.5” High Efficiency Impeller, 3 Blades, Low Shear, 316SS, Welded
Blades, Impeller Welded to Shaft, Polished to #4 Food Grade Finish

Adder: Stainless Clad Insulation for SYS6A4D00013-001
2″ Mineral Wool Insulation Covering Bottom Head and Shell with 14 Gage 304 Stainless
Steel Casing

Original Purchase Price: $12,985
Asking Price: $9,090

500 Gallon 304 Stainless Steel Dished Bottom Tank with mixer

500 Gallon 304 Stainless Steel Dished Bottom Tank, Dished Top, 2B-Ground Inside / 2B
Outside Finish, 304 Stainless Steel Externals, ASME Dimple Jacket, Insulated
Material Finish
Internal Surface Finish: 2B-G Finish w/ Welds Ground Smooth, Polished & Buffed
External Surface Finish: 2B Finish w/ Sharp Edges & Weld Discoloration Removed
(weld bead is still visible)
Passivate: None
Top
Top Head: Dished Top, 304 Stainless Steel, 12 Gage
Mixer Mount: No Bridge or Clamp Bracket; See Fittings Section Below for Flange,
Triclamp or NPT Mounts, As Applicable
Shell
Shell Dims: 52″ Outside Diameter x 60″ Straight Side Height, 304 Stainless Steel,
10 Gage
Shell Volume: 551 Gallons
Baffles: None
Bottom
Bottom Head: Dished, 304 Stainless Steel, 10 Gage
Heating and Cooling
Jacket: 304 Stainless Steel, 3.25″ Dimple Spacing, Shell & Dish Bottom Head, 48″
Straight Side Height, Relief Valve In Line By Others, 1-1/2″ NPT Nipples as
In/Outlet
Design: 50 PSI at 250°F, Surface Area = 9353 in2, (2) Zone
ASME Code Stamp: Yes
2″ Mineral Wool Insulation Covering Bottom Head and Shell with 14 Gage 304
Stainless Steel Casing
Fittings
18″ (460mm) Manway w/ Natural Rubber Gasket (<2 PSI @ 194°F) in Top Head for
Entry
4″ Triclamp Mixer Mount in Top Head for Mixer Mount
2″ Triclamp Ferrule in Top Head for Dip Tube (dip tube not included)
2″ Triclamp Ferrule in Top Head for Inlet
2″ Triclamp Ferrule in Bottom Head for Drain

Supports
Legs: (4) 2″ Pipe Legs, 304 Stainless Steel
Feet: Bolt Down Flanges
Casters: None
Clearance to the Floor: 12″
Fork Pockets: None
Lifting Lugs: (2) Lifting Lugs
1HP XP Triclamp Mount Mixer
Motor: 1 HP, XPFC Inverter Duty, Class 1, Div 1, Group C&D; Class 2, Div 1, Group
F&G, Temp Code T4, 10:1 Turndown, 208-230/460V, 3Ph, 1750 RPM, Bare Wire
Leads
Gearbox: Premium Worm Drive, 10:1 Ratio, (175 RPM Output at 1750 RPM Input),
56C NEMA Frame Adapter, Right Angle, Sealed and Maintenance Free, Paint Free
Aluminum, Synthetic Oil
Control: None
Mount: 4” Sanitary Mount, Tapered Recess for CIP, 316SS Wetted/Aluminum &
Painted Steel Externals, SS Hardware
Bearing: SS Bearing; 303 SS Coupler
Seal: FDA Lip Seal, Duralast 4331 Seal w/ Duraloy 5163 Case, Max 3PSI
Continuous
Wetted Surface Finish: 2B Finish
Shaft: 1.25” x 67” Exposed Length, 316SS, No Polish Included
Bottom Impeller: 16” High Efficiency Impeller, 3 Blades, Low Shear, 316SS, Welded
Blades, Deburred, Mill Finish, Keyed w/ Set Screw Attachment

Original Purchase Price: $27,651
Asking Price: $19,356

500 Gallon 304 Stainless Steel Dished Bottom Tank without mixer

Technical Specification for Part Number: S4ASD00500
500 Gallon 304 Stainless Steel Dished Bottom Tank, Dished Top, 2B-Ground Inside / 2B
Outside Finish, 304 Stainless Steel Externals, ASME Dimple Jacket, Insulated
Material Finish
Internal Surface Finish: 2B-G Finish w/ Welds Ground Smooth, Polished & Buffed
External Surface Finish: 2B Finish w/ Sharp Edges & Weld Discoloration Removed
(weld bead is still visible)
Passivate: None
Top
Top Head: Dished Top, 304 Stainless Steel, 12 Gage
Mixer Mount: No Bridge or Clamp Bracket; See Fittings Section Below for Flange,
Triclamp or NPT Mounts, As Applicable
Shell
Shell Dims: 52″ Outside Diameter x 60″ Straight Side Height, 304 Stainless Steel,
10 Gage
Shell Volume: 551 Gallons
Baffles: None
Bottom
Bottom Head: Dished, 304 Stainless Steel, 10 Gage
Heating and Cooling
Jacket: 304 Stainless Steel, 3.25″ Dimple Spacing, Shell & Dish Bottom Head, 48″
Straight Side Height, Relief Valve In Line By Others, 1-1/2″ NPT Nipples as
In/Outlet
Design: 50 PSI at 250°F, Surface Area = 9353 in2, (2) Zone
ASME Code Stamp: Yes
2″ Mineral Wool Insulation Covering Bottom Head and Shell with 14 Gage 304
Stainless Steel Casing
Fittings
18″ (460mm) Manway w/ Natural Rubber Gasket (<2 PSI @ 194°F) in Top Head for
Entry
4″ Triclamp Mixer Mount in Top Head for Mixer Mount
2″ Triclamp Ferrule in Top Head for Dip Tube (dip tube not included)
2″ Triclamp Ferrule in Top Head for Inlet
2″ Triclamp Ferrule in Bottom Head for Drain
Supports
Legs: (4) 2″ Pipe Legs, 304 Stainless Steel
Feet: Bolt Down Flanges
Casters: None
Clearance to the Floor: 12″
Fork Pockets: None
Lifting Lugs: (2) Lifting Lugs

Original Purchase Price: $23,932
Asking Price: $16,752

300 Gallon Pro Series Reproofing-Still

300 Gallon Pro Series Still with 16” stainless 16 plate column
Includes 12” x 72” stainless condenser (NO AGITATOR)
Rite Indoor 63 S 15 HP Low Pressure Steam Boiler—propane fired
Rite indoor CR-50 Condensate Return/Feedwater System
(2) united brass #50 spring loaded check valves
BDT LPS 1648 ASME Code Blowdown tank
Twin tank water softener system
Rite Chemical feed system
Sample cooler installed and piped on the side
Hoffman WC6-20 B Condensate transfer station
Year: 2019
Serial No.: 33551, 33552, A0920

Original Purchase Price: $87,602
Asking Price: $61,321

Single Stage SPD Unit

Manufacturer: SciPhy
Year: 2019
Serial No.: JSI-190402

Specifications for Single-stage 0.1m2 SPD System

1. Feedstock tank
Feedstock tank: 50L, without an agitator
With jacket for hot oil heating
All necessary valves and instruments
2. Short path Distiller
Type: SPD
Evaporator surface: 0.1m2
Internal diameter of the internal evaporator body: about 125mm
Heating fluid for evaporator: Hot oil 250 °C
(actual work temp: 200 °C)
Cooling fluid for internal condenser: Cooling water (Tempered)
Wiping system, removable: roller wiper system
Rotary transmission: double mechanical sealing
Wiper type: Roller wiper, one set of Roller Wipers to be equipped on the
machine
3. Cold trap: 0.22 m2
Heat Exchange surface: 0.22m2
4. Receiver tanks for SPD
Two receiver tanks for receiving heavy-phase components and light-phase
components
One heavy-phase receiver tank with jacket, 5L, with sight glass and level gauge
One Light-phase receiver tank with jacket, 5L, with sight glass and level gauge
5. Distillate product discharge gear pump with variable speed control
Equipped with ABB motor, power: 0.37KW, the pump is with jacket heating
Flow range: 3~20L/h, temp range: -30~250 Deg C
All necessary valves and instruments
6. Residue discharge gear pump with variable speed control
Equipped with ABB motor, power: 0.37KW, the pump is with jacket heating
Flow range: 3~20L/h, temp range: -30~250 Deg C
All necessary valves and instruments
7. Piping
All necessary product and vacuum piping will be supplied within skid
Cooling water to condenser will be provided and connected by customer
8 . Vacuum System for SPD consisting of the following:
Vacuum line to the cold trap #2
Cold trap cooled: 0.22m ²
WAU501 FP LeyBold Roots vacuum pump
LV80 Leybold Dry screw vacuum pump
Direct Mounted WAU501 FP: pumping rate: 607 m ³ /h @60 Hz, ultimate
pressure: 6.7 x 10 ⁻² mbar (5 x 10 ⁻² Torr ) , motor power: 2.2KW, rotation
speed:
7200 rpm
Dry screw vacuum pump LeyBold LV80: 80 m ³ /h, ultimate pressure: 1 x 10⁻²
mbar , motor power: 3.2kW, water-cooled, cooling water consumption: 180 L/hr
Voltage: 3-ph, 380/480 V, 50/60 Hz1
9. Control box
A small control box for manual controls, will include frequency inverter and
manual ON/OFF switches.
10. The Warm Water Circulation System
· Delta-T Single zone water circulating temperature control system
· Compact, space saving, cast design
· Heavy gauge, powder coated sheet metal cabinet
· All components easily accessible for servicing when required
· Suitable for operation up to 250°F (121°C)
· NPT water supply and drain connections
· 1.5” NPT delivery and return connections
· Direct injection cooling circuit
· 3” heavy duty industrial grade casters (2 swivel, 2 stationary)

 Original Purchase Price: $96,350
Asking Price: $67,445

Legacy Chiller PZAPT4SH5

Manufacturer: Legacy
Year: 2019
Serial No.: 19FO2198

!!!Needs Technical Support!!!The communication between the panel and controller has to be fixed! Call for service.

Legacy – MO# PZAPT4SH5 Liquid Chiller Package
with internal plastic tank with SCROLL
compressor(s). NOTE: Tank is plumbed as buffer
system.
System performance capability: MO# PZAPT4SH5
Air-cooled condenser @ 45F leaving water temp @
95F outdoor ambient temperature will provide
43200 BTUH.
Base platform description: Self-contained package
fluid chiller, 460-3-60, R407C, air-cooled condenser.

Original Price: $8,592
Asking Price: $5,155 (40% Off)

Delta T System Air Cool Chiller VSPA-008

Manufacturer: Delta T Systems
Year: 2019
Serial No.: 21891

Delta T Systems Model VSPA-008
Variable Speed, Portable Air Cooled Chiller
GENERAL UNIT OVERVIEW
 7.5 ton air cooled chiller
18 GPM at 35 PSI pump/motor; 1 Hp
Footprint of 34W” x 34D” x 74.5H”
Wired for 3/60/460; MCA 15.51
Full featured unit: variable speed compressor and fan motor, electronic expansion valve,
±0.5º F temp control, 0º-80º F temp range.
1.5 Hp pump (18 GPM @ 51 PSI)

Original Purchase Price: $15,275
Asking Price: $10,693

Delta – T System Heater – oil T 1021MS

Manufacturer: Delta T Systems
Year: 2019
Serial No.: 21764

UNIT OVERVIEW

Single zone oil circulating temperature control system
Upright, operator convenient design
Heavy gauge, powder coated, sheet metal cabinet
All components easily accessible for servicing when required
Suitable for operation up to 550°F (287°C)
1” NPT delivery and return connections
Heating only capability
3” Heavy duty industrial grade casters (2 swivel, 2 stationary)
5.5 gallon expansion/reservoir tank
Y-strainer on return line to keep circulating fluid clean

PUMP SPECIFICATIONS
Positive displacement, mechanical seal circulating pump
¾ HP 3 phase motor
10 GPM @ 30 PSI pumping capacity

MECHANICAL FEATURES
12 KW heating capacity using low watt density, steel sheath heater elements
Fully insulated heater tank to maximize heating efficiency
“To process” system pressure gage
“Fulflo” bypass valve, to protect the heating elements and pump
Highly visible system status indicators:
o Power – on, Heating – on

ELECTRICAL/SAFETY SPECIFICATIONS
Fused motor and heater protection
Fuse transformer protection on both primary and secondary sides
Grounded control circuit
Motor overload protection
High temperature safety thermostat protection
Non-fused disconnect switch
NEMA 1 electrical specifications and NEC electrical code conformance
UL, CSA, CE recognized and listed electrical components
Wired 3/60/460

CONTROLLER FEATURES
Fully programmable to provide versatility and control flexibility
Bright easy-to-read LED display
“Positive feel” control buttons
Full feature “autotune” capability
Included Options:
1/8 DIN ATHENA MODEL 18C-4/20MA W/ AUTO VENT
Pump reverse with manual drain
Touch Safe Electronics (covers over electrical components)
Paratherm NF®, our recommended heat transfer fluid, 55 gallon drum

Original Price: $10,637
Asking Price: $7,446

Delta – T System Heater – oil T 1021MS

Manufacturer: Delta T Systems
Year: 2019
Serial No.: 21745

UNIT OVERVIEW

Single zone oil circulating temperature control system
Upright, operator convenient design
Heavy gauge, powder coated, sheet metal cabinet
All components easily accessible for servicing when required
Suitable for operation up to 550°F (287°C)
1” NPT delivery and return connections
Heating only capability
3” Heavy duty industrial grade casters (2 swivel, 2 stationary)
5.5 gallon expansion/reservoir tank
Y-strainer on return line to keep circulating fluid clean

PUMP SPECIFICATIONS
Positive displacement, mechanical seal circulating pump
¾ HP 3 phase motor
10 GPM @ 30 PSI pumping capacity

MECHANICAL FEATURES
12 KW heating capacity using low watt density, steel sheath heater elements
Fully insulated heater tank to maximize heating efficiency
“To process” system pressure gage
“Fulflo” bypass valve, to protect the heating elements and pump
Highly visible system status indicators:
o Power – on, Heating – on

ELECTRICAL/SAFETY SPECIFICATIONS
Fused motor and heater protection
Fuse transformer protection on both primary and secondary sides
Grounded control circuit
Motor overload protection
High temperature safety thermostat protection
Non-fused disconnect switch
NEMA 1 electrical specifications and NEC electrical code conformance
UL, CSA, CE recognized and listed electrical components
Wired 3/60/460

CONTROLLER FEATURES
Fully programmable to provide versatility and control flexibility
Bright easy-to-read LED display
“Positive feel” control buttons
Full feature “autotune” capability
Included Options:
1/8 DIN ATHENA MODEL 18C-4/20MA W/ AUTO VENT
Pump reverse with manual drain
Touch Safe Electronics (covers over electrical components)
Paratherm NF®, our recommended heat transfer fluid, 55 gallon drum

Original Price: $10,637
Asking Price: $7,446

Delta – T System Heater – water AD431S

Manufacturer: Delta T Systems
Year: 2019
Serial No.: 21776

Delta T Systems Temperature Control Unit
Accent Series

GENERAL UNIT OVERVIEW
Full featured water temperature control unit designed for
continuous, reliable service
9 kW single zone temperature control
¾ hp, 25 gpm at 25 psi centrifugal pump/motor
3/60/460V electrical service
250° F max operating temperature
Microprocessor based, PID controller, 1/16th DIN

STANDARD FEATURES
Mechanical Features
Compact, space saving cabinet with heavy gauge, powder coated sheet metal
construction
Heavy duty 3” industrial grade casters (2 swivel, 2 stationary)
Centrifugal pump, 3 phase motor, non-overloading
Stainless steel motor shaft
Long life silicon carbide high temperature seal
Incoloy sheathed, low watt density heater element
Fully insulated tank to maximize heating efficiency
Automatic vent sequence with vent button to purge the process loop
Liquid filled Delivery and Return pressure gauges
Highly visible system status indicators:
o Cooling –on
o Low water pressure
o Power – on
o Heating – on
Direct injection cooling method; cooling solenoid integral to the drain line
Safety relief valve, protects the process loop from high pressure
Safety thermostat protection programmed into the PID controller
Safety pressure switch, protects unit from running without cooling water

Controls and Electrical Features
Fully programmable microprocessor based PID controller, designed to provide versatility
and control flexibility
Motor circuit interrupter protection
Fuse protection on primary and secondary side of the control transformer
Grounded control circuit
NEMA 1 electrical specifications and NEC electrical code conformance
UL, CSA, CE recognized and listed electrical components

Original Price: $2,425
Asking Price: $1,698

Vacuum Pump Rocker 801

Manufacturer: Rocker
Year: 2019
Serial No.: 167801-11-BABB034

• Model number: Rocker801
• Discharge flow rate (50/60Hz): 67/80L/min
• Achieving pressure: 12kPa
• Connection port size: 8mm
• Noise: 68dB
• Power supply: 110V +/-10% 220W
• Outlet shape: 3P (without conversion plug)
• Power cord length: 1.7m
• Size: 346 x 175 x 200mm
• Weight: 7.9kg
• Accessories: Trap, regulator

Original Purchase Price: $899
Asking Price: $629

HPLC Shimadzu LC2030-C

Manufacturer: Shimadzu
Year: 2019
Serial No.: L21445650239US

The Shimadzu i-Series HPLC systems help users to improve their workflow with automation, high throughput, ecological features and compatibility with mobile devices while maintaining adaptability with existing methods for easy transfer. In addition to the uncompromised efficiency and quality of analysis, operators benefit from intuitive operation of the color touch panel, remote monitoring and control by smartphone or tablet PC as well as advanced startup and shutdown functions. These features make the i-Series family an intelligent instrument which fits both large labs requiring high throughput operation as well as small labs with limited bench space. The i-Series increases productivity, e.g. in R&D, quality control and safety testing, while minimizing operator workload, cost of ownership and environmental impact.

This model includes a sample cooler and a UV detector. It is previously used for cannabis potency analysis.

Original Price: $48,444
Asking Price: $33,911

6′ Protector Premier Laboratory Hood, 208-230V, 50/60Hz

These hoods are suitable for providing personal protection needed for general chemistry applications involving fumes and vapors. They meet the SEFA-1 standard of a low velocity, high performance hood and may be safely operated as low as 60 fpm. Choose from hoods designed to be used with a remotely-located blower or hoods that include a built-in blower — the only high performance hood with built-in blower available anywhere. Explosion-proof hoods with built-in blower are available for laboratories with potentially explosive/flammable atmospheres (Class 1 Div I or II). 

3 Compartment Sink

Stainless Steel

Year: 2019

High Temp Dishwasher HT-180

Harter – German Box Dryer – Pharmaceutical Grade

Bulk density: approx. 200 kg/m³ (moist product)
Input per batch: ~ 2700 kg
= dried product per batch: ~ 578 kg
Drying time per batch: ~ 24 h
Product moisture before drying: 80%
Product moisture after drying: < 8%
Moisture input of product: ~ 2122 L/batch
Fill depth level: approx. 500 mm (modus floor drying)
Drying temperature: to be determined by the customer
Temperature range without heatpipe: 10 – 60°C
Dehumidification power 2x Airgenex: approx. 2x 45 l/h (at air temperature of 25°C and
degree of saturation of return air at 50%rF)
Air routing in chamber: vertically

Original Price: $316,765
Asking Price: $221,735

Schutte-Buffalo 1320 Hammer Mill

40 HP, TEFC, 3/60/460/3600 rpm motor, direct connected with guard.

Mill manufactured from ½” A-36 plate, mounted to a structural steel sub-base.

Screens that lock in place for perfect fit – two screens provided

Heavy-duty, statically, and dynamically-balanced rotor assembly with:

3/8” standard notched heat-treated hammers

3/4” diameter heat-treated hammer rods

Precision machined shaft warranted for five (5) full years

1/4” rotor discs

Grease lubricated ball bearings – 2 7/16”

Magnet mounted on infeed table

Safety interlock package

40 HP Variable Speed Drive (460V)

Carbon Steel Support Stand to Elevate Mill

Discharge collection bin (carbon or stainless), with dust collector, fittings and hoses.  Local control for dust collector.

Inclusive:
DISCHARGE AUGER 304SS
9″ DIAMETER
U-STYLE
10FT LONG WITH 2HP VFD
CARBON STEEL SUPPORT STAND

Original Price: $54,095
Asking Price: $37,867

CenturionPro HP3 TRIPLE BUCKER (STAND INCLUDED)

At $10,995 USD, the HP3 Triple Bucker provides triple the production capacity of the HP1, resulting in the industry’s highest buck rate per hour. This bucker utilizes two rollers per workstation that pull the stem into the machine, therefore popping the flowers off.

Complete with three workstations, the HP3 Triple Bucker is a multi-operator run industrial de-stemming machine that requires 3 operators for optimal speed and efficiency. Each workstation has 5 different sized holes to provide versatility and improve processing capacity. The HP3 Triple Bucker accepts stems up to 3/4” in diameter and can process up to 500 lbs wet (up to 100lbs dry) per hour of use. This triple-headed machine comes with a bucker stand included for added value and ease of de-stemming. The bucker stand comes standard with industrial casters.

When combined with the high productivity of a CenturionPro trimming machine, you’ll get the highest capacity harvesting system in the world! The HP3 Triple Bucker comes complete with three 0.75 HP gear driven motors with a variable speed controller to provide unsurpassed power, adjustability and control. Thanks to the variable speed controls, wet or dry product can be processed with ease! The system is easy to set up and is made of stainless steel and anodized aluminum making it robust as well as easy to clean. The HP3 Triple Bucker plugs into a 110 volt, 20 amp circuit – EU/AUS compatible. Backed by a 10 years warranty.

The HP3 Triple Bucker is quickly making a name for itself as the highest capacity bucker in the world! This bucker is simple, powerful and effective and will process product at an unprecedented rate.

Original Price: $10,995
Asking Price: $7,697